讨论中心 | 返回首页 | English
设为首页 | 加入收藏 | 联系我们

0086-755-83958812

fiona@yeshere.cn

您现在的位置:首页 --VLSI产品 环保支持

Lead-Free 

The external lead finish of plastic packages used until today is an electroplate of a Tin-Lead (Sn-Pb) alloy. This alloy has been the primary finish of electronic components for many years due mainly to the reliability of solder joints and ease of manufacturing. Sn-Pb plating for plastic packages usually consists of 10-20% lead.

Lead-free means less than 1000ppm Lead in over-all composition. The common Lead-free finishes on packages with leads are as follows:

·                  100% Sn or Matte Tin

·                  Tin-Bismuth (Sn-Bi)

·                  Nickel-Palladium (Ni-Pd)

100% Matte Tin is the most common.

RoHS Compliant

The RoHS directive took effect on 1st of July 2006 and will become law in each member state of European Union (EU). This directive restricts the use of six hazardous materials in the manufacture electronic and electrical equipment.

RoHS restricts the use of the following six substances:

·                  Lead - Pb (Max 1000 ppm)

·                  Cadmium - Cd (Max 100 ppm)

·                  Mercury - Hg (Max 1000 ppm)

·                  Hexavalent Chromium - Cr VI (Max 1000 ppm) Poly Brominated Byphenyl -

·                  PBB (Max 1000 ppm)

·                  Poly Brominated Dyphenyl Ether - PBDE (Max 1000 ppm)

As can bee seen from the concentrations, RoHS compliant package is Lead-Free.

Green Package

Industry consensus defines a green package as a package that is RoHS compliant and additionally:

·                  Green Epoxy - Epoxy that can withstand 260 deg C soldering temp.

·                  Green Molding Mold Compound, Laminate, Solder resist - No brominated epoxy resin type as flame retardant  (Halogen-Free Cl or Br <900 ppm, Antimony-Free Sb2O3 <900 ppm)

Green Packages used by VLSI Solution

The following packages are qualified and available today from us as green packages. These SMD packages meet MSL Level 3 moisture sensitivity at 260oC peak reflow soldering temperature.

 

Package

Finish

Mold Compound

Epoxy

SOIC

Matte-Tin

G700

CRM 1076NS

LQFP

Matte_Tin

G700

CRM 1076D or CRM 1076NS

BGA

Matte-Tin

G760

ABLEBOND 2000B

QFN

Matte-Tin

G770HC

CRM 1066C

Detailed material declaration files are available here.

Green package reflow soldering profile (SMT components)

Our devices are qualified to meet the requirements of the preconditioning specified by JEDEC standard J-STD-020D.

Below is summary of the preconditioning. Actual board assembly profiles should be developed based on used solder paste, specific process needs, and board designs. However, settings should not exceed the preconditioning parameters of J-STD-020D.

深圳市源合汇通科技有限公司 版权所有| 粤ICP备17047300号
TEL:0086-755-83958812, FAX:0086-755-83958910
  网站首页 | 关于我们 | 代理产品 | 分销产品